LS2600 Oil in Water Content Analyzer

Shanghai Bin Magnetic LS2600 Infrared Spectrophotometric Oil Analyzer InstrumentPrinciple:

When monochromatic light passes through the sample solution, its energy is absorbed. The degree of light intensity absorption is proportional to the concentration of the substance being measured, in accordance with the Lambert-Beer Law: A=log(1/T)=log(I0/I)=a×b×c

Standard "HJ 637-2018 Water Quality - Determination of Petroleum and Animal Oils - Infrared Spectrophotometry" uses tetrachloride to extract petroleum substances from water and measure petroleum content.

ComplianceStandards:

Complies with standard HJ 637-2018 "Water Quality - Determination of Petroleum and Animal and Vegetable Oils - Infrared Spectrophotometry"

Complies with standard HJ 1077-2019 "Stationary Source Emission - Determination of Cooking Fume and Oil Mist - Infrared Spectrophotometry"

Complies with standard: HJ1051-2019 "Soil - Determination of Petroleum - Infrared Spectrophotometry"

Complies with standard GB18483-2001 "Emission Standard for Cooking Fume"

Complies with standard GB3838-2002 "Environmental Quality Standards for Surface Water"

Complies with standard GB18918-2002 "Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant"

Complies with petroleum standard SY/T0530-2011 "Determination of Oil Content in Oilfield Produced Water by Spectrophotometry"

Complies with oilfield standard DB65/T3998-2017 "Pollution Control Requirements for Comprehensive Utilization of Oily Sludge in Oil and Gas Fields"

Shanghai Bin Magnetic LS2600 Infrared Spectrophotometric Oil Analyzer Technical Parameters

l Uses pulsed light source for signal reception and output

l Technical principle: Motor subdivision drive grating spectrophotometry technology

l Cooling technology: Semiconductor cooling cold light source to eliminate temperature error

l Baseline drift correction system, output signal without drift

l Blank solvent zeroing: Automatic saving; Measurement data: Automatic calculation of results

l Instrument scanning range: 3400 cm⁻¹ to 2400 cm⁻¹ (2930 cm⁻¹, 2960 cm⁻¹, 3030 cm⁻¹)

l Absorbance range: 0.00000～2.00000AU

l Measurement range: 0～80000.00mg/L

l Resolution: 0.001mg/L

l Maximum measurement concentration: 100

l Wavenumber accuracy and repeatability: ±0.5cm⁻¹

l Linear correlation coefficient R＞0.999

l Methyl resolution＞2%

l Sample analysis time: 0~60 seconds

l Ambient temperature: 2℃～40℃, Relative humidity: 10%～90%

Shanghai Bin Magnetic LS2600 Infrared Spectrophotometric Oil Analyzer InstrumentFunctions

l Measurement targets: Oil content in water, soil, catering fumes, gases, and other substances

l Continuous spectrum scanning function, high-contrast sample spectra, accurately determining oil content results, automatic calculation, automatic storage of 100,000 data entries including results, test spectra, and set conditions; query and print detection reports; features mathematical statistics, spectrum display, storage, and other functions.

l Visual operation interface, guided operation procedure.

l Unaffected by room temperature changes; continuous analysis testing with automatic temperature compensation.

l Analysis system compatible with Windows 7, Windows 10, Windows 11.

l Fast calibration mode, meeting both standard and metrological specifications, while complying with international standards.

l Uses imported optical platform system, short optical path, high energy, meeting infrared spectrum characteristics requirements, good stability, high signal-to-noise ratio.

l Detachable integrated optical system, making the instrument compact, with short optical path and high energy; spectrally separated before absorption, meeting infrared spectrum characteristics requirements, good stability, high signal-to-noise ratio.

l 24-bit, 500KHz A/D conversion, high-speed USB2.0 interface, compatible with USB3.0 high-performance electronic system, achieving real-time spectral data acquisition, ensuring data authenticity and reliability.

l Uses advanced switching power supply light source, reducing light source heat generation for better system cooling, while minimizing mechanical chopper components to simplify instrument structure and improve reliability.

l Unaffected by room temperature changes: Continuous analysis testing with automatic temperature compensation.

l Multiple environmental reagents available for use.

l Features instrument calibration coefficient function: Single-point fast calibration, standard curve calibration, and three national standard substance calibrations.

l Storage function: Main unit can store sample number, detection time, detection results, extractant type, and other information.